Forum breadcrumbs - You are here:ForumCategories: Assembly & setupQuestion about parts for assembli …
Question about parts for assembling
#1 · 2023-06-05, 17:03
Quote from tecman on 2023-06-05, 17:03Hi,
at the moment I am searching, ordering and printing all the parts for assembling the Satran MK3.
But for two parts I have a question.1. Is the antenna bracket as STL file for 3d printing available? If not, is it selfmade or somewhere available to order?
2. What kind of ferrite-bead is used for FB1 and FB2?I hope one of you can help me.
Thanks a lot
Tecman
Hi,
at the moment I am searching, ordering and printing all the parts for assembling the Satran MK3.
But for two parts I have a question.
1. Is the antenna bracket as STL file for 3d printing available? If not, is it selfmade or somewhere available to order?
2. What kind of ferrite-bead is used for FB1 and FB2?
I hope one of you can help me.
Thanks a lot
Tecman
Click for thumbs down.0Click for thumbs up.0
#2 · 2023-06-15, 12:52
Quote from Danaco on 2023-06-15, 12:52
- Theres a pdf on the downloads page with a scale 1:1 blueprint of the antenna bracket so you can use it as a template to cut your own in aluminum. The MK1 has files for a bracket in 3d-printed plastic that might work, but it is not as strong as metal.
- Any axial ferrite can be used, or just bypass them with wire if you like or put a ferrite bead on the incoming power cable instead.
good luck
- Theres a pdf on the downloads page with a scale 1:1 blueprint of the antenna bracket so you can use it as a template to cut your own in aluminum. The MK1 has files for a bracket in 3d-printed plastic that might work, but it is not as strong as metal.
- Any axial ferrite can be used, or just bypass them with wire if you like or put a ferrite bead on the incoming power cable instead.
good luck
Click for thumbs down.0Click for thumbs up.0